Transmitter Plus manual
A complete manual for the Transmitter Plus does not exist.
You can find additional information here.
Group Button
- Select the groups in which you have placed flash units in Group 1, 2, 3, 4 to control them separately.
- To set flash units into different groups, see the flash unit manual.
- All means that all-flash units will fire or increase or decrease flash power with the -/+ buttons.
Mode Button
- If the lights on the transmitter show up in green, you are in the right sync mode, which we call Normal Sync Mode.
- By pressing 2 sec. on the mode button, you can change into another sync mode. The light shows up in red, which only works with digital large-format cameras to sync speed above the normal x-sync, up to about a 1/1600s with a Phase One camera.
- If this setting is used, also the flash unit needs to be configured in the correct sync mode, otherwise no communication.
- We suggest not using this feature since it does not bring any advantage with DSLR cameras and reduces the distance range by 50%.
Learn more about Normal and Speed mode.
CH Button
This button allows using other frequencies in case there is interference with other wireless networks.
The frequency settings must also be changed on the flash unit, otherwise no communication.
